From 375c120d30456738897c4bd775e38aa1db7d239c Mon Sep 17 00:00:00 2001 From: Fox Caminiti Date: Thu, 22 Dec 2022 13:29:02 -0500 Subject: v3.1 --- dependencies/SDL/SDL_thread.h | 464 ------------------------------------------ 1 file changed, 464 deletions(-) delete mode 100644 dependencies/SDL/SDL_thread.h (limited to 'dependencies/SDL/SDL_thread.h') diff --git a/dependencies/SDL/SDL_thread.h b/dependencies/SDL/SDL_thread.h deleted file mode 100644 index 7364f81..0000000 --- a/dependencies/SDL/SDL_thread.h +++ /dev/null @@ -1,464 +0,0 @@ -/* - Simple DirectMedia Layer - Copyright (C) 1997-2022 Sam Lantinga - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef SDL_thread_h_ -#define SDL_thread_h_ - -/** - * \file SDL_thread.h - * - * Header for the SDL thread management routines. - */ - -#include "SDL_stdinc.h" -#include "SDL_error.h" - -/* Thread synchronization primitives */ -#include "SDL_atomic.h" -#include "SDL_mutex.h" - -#if defined(__WIN32__) || defined(__GDK__) -#include /* _beginthreadex() and _endthreadex() */ -#endif -#if defined(__OS2__) /* for _beginthread() and _endthread() */ -#ifndef __EMX__ -#include -#else -#include -#endif -#endif - -#include "begin_code.h" -/* Set up for C function definitions, even when using C++ */ -#ifdef __cplusplus -extern "C" { -#endif - -/* The SDL thread structure, defined in SDL_thread.c */ -struct SDL_Thread; -typedef struct SDL_Thread SDL_Thread; - -/* The SDL thread ID */ -typedef unsigned long SDL_threadID; - -/* Thread local storage ID, 0 is the invalid ID */ -typedef unsigned int SDL_TLSID; - -/** - * The SDL thread priority. - * - * SDL will make system changes as necessary in order to apply the thread priority. - * Code which attempts to control thread state related to priority should be aware - * that calling SDL_SetThreadPriority may alter such state. - * SDL_HINT_THREAD_PRIORITY_POLICY can be used to control aspects of this behavior. - * - * \note On many systems you require special privileges to set high or time critical priority. - */ -typedef enum { - SDL_THREAD_PRIORITY_LOW, - SDL_THREAD_PRIORITY_NORMAL, - SDL_THREAD_PRIORITY_HIGH, - SDL_THREAD_PRIORITY_TIME_CRITICAL -} SDL_ThreadPriority; - -/** - * The function passed to SDL_CreateThread(). - * - * \param data what was passed as `data` to SDL_CreateThread() - * \returns a value that can be reported through SDL_WaitThread(). - */ -typedef int (SDLCALL * SDL_ThreadFunction) (void *data); - - -#if defined(__WIN32__) || defined(__GDK__) -/** - * \file SDL_thread.h - * - * We compile SDL into a DLL. This means, that it's the DLL which - * creates a new thread for the calling process with the SDL_CreateThread() - * API. There is a problem with this, that only the RTL of the SDL2.DLL will - * be initialized for those threads, and not the RTL of the calling - * application! - * - * To solve this, we make a little hack here. - * - * We'll always use the caller's _beginthread() and _endthread() APIs to - * start a new thread. This way, if it's the SDL2.DLL which uses this API, - * then the RTL of SDL2.DLL will be used to create the new thread, and if it's - * the application, then the RTL of the application will be used. - * - * So, in short: - * Always use the _beginthread() and _endthread() of the calling runtime - * library! - */ -#define SDL_PASSED_BEGINTHREAD_ENDTHREAD - -typedef uintptr_t (__cdecl * pfnSDL_CurrentBeginThread) - (void *, unsigned, unsigned (__stdcall *func)(void *), - void * /*arg*/, unsigned, unsigned * /* threadID */); -typedef void (__cdecl * pfnSDL_CurrentEndThread) (unsigned code); - -#ifndef SDL_beginthread -#define SDL_beginthread _beginthreadex -#endif -#ifndef SDL_endthread -#define SDL_endthread _endthreadex -#endif - -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThread(SDL_ThreadFunction fn, const char *name, void *data, - pfnSDL_CurrentBeginThread pfnBeginThread, - pfnSDL_CurrentEndThread pfnEndThread); - -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThreadWithStackSize(SDL_ThreadFunction fn, - const char *name, const size_t stacksize, void *data, - pfnSDL_CurrentBeginThread pfnBeginThread, - pfnSDL_CurrentEndThread pfnEndThread); - - -#if defined(SDL_CreateThread) && SDL_DYNAMIC_API -#undef SDL_CreateThread -#define SDL_CreateThread(fn, name, data) SDL_CreateThread_REAL(fn, name, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#undef SDL_CreateThreadWithStackSize -#define SDL_CreateThreadWithStackSize(fn, name, stacksize, data) SDL_CreateThreadWithStackSize_REAL(fn, name, stacksize, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#else -#define SDL_CreateThread(fn, name, data) SDL_CreateThread(fn, name, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#define SDL_CreateThreadWithStackSize(fn, name, stacksize, data) SDL_CreateThreadWithStackSize(fn, name, data, (pfnSDL_CurrentBeginThread)_beginthreadex, (pfnSDL_CurrentEndThread)SDL_endthread) -#endif - -#elif defined(__OS2__) -/* - * just like the windows case above: We compile SDL2 - * into a dll with Watcom's runtime statically linked. - */ -#define SDL_PASSED_BEGINTHREAD_ENDTHREAD - -typedef int (*pfnSDL_CurrentBeginThread)(void (*func)(void *), void *, unsigned, void * /*arg*/); -typedef void (*pfnSDL_CurrentEndThread)(void); - -#ifndef SDL_beginthread -#define SDL_beginthread _beginthread -#endif -#ifndef SDL_endthread -#define SDL_endthread _endthread -#endif - -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThread(SDL_ThreadFunction fn, const char *name, void *data, - pfnSDL_CurrentBeginThread pfnBeginThread, - pfnSDL_CurrentEndThread pfnEndThread); -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThreadWithStackSize(SDL_ThreadFunction fn, const char *name, const size_t stacksize, void *data, - pfnSDL_CurrentBeginThread pfnBeginThread, - pfnSDL_CurrentEndThread pfnEndThread); - -#if defined(SDL_CreateThread) && SDL_DYNAMIC_API -#undef SDL_CreateThread -#define SDL_CreateThread(fn, name, data) SDL_CreateThread_REAL(fn, name, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#undef SDL_CreateThreadWithStackSize -#define SDL_CreateThreadWithStackSize(fn, name, stacksize, data) SDL_CreateThreadWithStackSize_REAL(fn, name, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#else -#define SDL_CreateThread(fn, name, data) SDL_CreateThread(fn, name, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#define SDL_CreateThreadWithStackSize(fn, name, stacksize, data) SDL_CreateThreadWithStackSize(fn, name, stacksize, data, (pfnSDL_CurrentBeginThread)SDL_beginthread, (pfnSDL_CurrentEndThread)SDL_endthread) -#endif - -#else - -/** - * Create a new thread with a default stack size. - * - * This is equivalent to calling: - * - * ```c - * SDL_CreateThreadWithStackSize(fn, name, 0, data); - * ``` - * - * \param fn the SDL_ThreadFunction function to call in the new thread - * \param name the name of the thread - * \param data a pointer that is passed to `fn` - * \returns an opaque pointer to the new thread object on success, NULL if the - * new thread could not be created; call SDL_GetError() for more - * information. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_CreateThreadWithStackSize - * \sa SDL_WaitThread - */ -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThread(SDL_ThreadFunction fn, const char *name, void *data); - -/** - * Create a new thread with a specific stack size. - * - * SDL makes an attempt to report `name` to the system, so that debuggers can - * display it. Not all platforms support this. - * - * Thread naming is a little complicated: Most systems have very small limits - * for the string length (Haiku has 32 bytes, Linux currently has 16, Visual - * C++ 6.0 has _nine_!), and possibly other arbitrary rules. You'll have to - * see what happens with your system's debugger. The name should be UTF-8 (but - * using the naming limits of C identifiers is a better bet). There are no - * requirements for thread naming conventions, so long as the string is - * null-terminated UTF-8, but these guidelines are helpful in choosing a name: - * - * https://stackoverflow.com/questions/149932/naming-conventions-for-threads - * - * If a system imposes requirements, SDL will try to munge the string for it - * (truncate, etc), but the original string contents will be available from - * SDL_GetThreadName(). - * - * The size (in bytes) of the new stack can be specified. Zero means "use the - * system default" which might be wildly different between platforms. x86 - * Linux generally defaults to eight megabytes, an embedded device might be a - * few kilobytes instead. You generally need to specify a stack that is a - * multiple of the system's page size (in many cases, this is 4 kilobytes, but - * check your system documentation). - * - * In SDL 2.1, stack size will be folded into the original SDL_CreateThread - * function, but for backwards compatibility, this is currently a separate - * function. - * - * \param fn the SDL_ThreadFunction function to call in the new thread - * \param name the name of the thread - * \param stacksize the size, in bytes, to allocate for the new thread stack. - * \param data a pointer that is passed to `fn` - * \returns an opaque pointer to the new thread object on success, NULL if the - * new thread could not be created; call SDL_GetError() for more - * information. - * - * \since This function is available since SDL 2.0.9. - * - * \sa SDL_WaitThread - */ -extern DECLSPEC SDL_Thread *SDLCALL -SDL_CreateThreadWithStackSize(SDL_ThreadFunction fn, const char *name, const size_t stacksize, void *data); - -#endif - -/** - * Get the thread name as it was specified in SDL_CreateThread(). - * - * This is internal memory, not to be freed by the caller, and remains valid - * until the specified thread is cleaned up by SDL_WaitThread(). - * - * \param thread the thread to query - * \returns a pointer to a UTF-8 string that names the specified thread, or - * NULL if it doesn't have a name. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_CreateThread - */ -extern DECLSPEC const char *SDLCALL SDL_GetThreadName(SDL_Thread *thread); - -/** - * Get the thread identifier for the current thread. - * - * This thread identifier is as reported by the underlying operating system. - * If SDL is running on a platform that does not support threads the return - * value will always be zero. - * - * This function also returns a valid thread ID when called from the main - * thread. - * - * \returns the ID of the current thread. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_GetThreadID - */ -extern DECLSPEC SDL_threadID SDLCALL SDL_ThreadID(void); - -/** - * Get the thread identifier for the specified thread. - * - * This thread identifier is as reported by the underlying operating system. - * If SDL is running on a platform that does not support threads the return - * value will always be zero. - * - * \param thread the thread to query - * \returns the ID of the specified thread, or the ID of the current thread if - * `thread` is NULL. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_ThreadID - */ -extern DECLSPEC SDL_threadID SDLCALL SDL_GetThreadID(SDL_Thread * thread); - -/** - * Set the priority for the current thread. - * - * Note that some platforms will not let you alter the priority (or at least, - * promote the thread to a higher priority) at all, and some require you to be - * an administrator account. Be prepared for this to fail. - * - * \param priority the SDL_ThreadPriority to set - * \returns 0 on success or a negative error code on failure; call - * SDL_GetError() for more information. - * - * \since This function is available since SDL 2.0.0. - */ -extern DECLSPEC int SDLCALL SDL_SetThreadPriority(SDL_ThreadPriority priority); - -/** - * Wait for a thread to finish. - * - * Threads that haven't been detached will remain (as a "zombie") until this - * function cleans them up. Not doing so is a resource leak. - * - * Once a thread has been cleaned up through this function, the SDL_Thread - * that references it becomes invalid and should not be referenced again. As - * such, only one thread may call SDL_WaitThread() on another. - * - * The return code for the thread function is placed in the area pointed to by - * `status`, if `status` is not NULL. - * - * You may not wait on a thread that has been used in a call to - * SDL_DetachThread(). Use either that function or this one, but not both, or - * behavior is undefined. - * - * It is safe to pass a NULL thread to this function; it is a no-op. - * - * Note that the thread pointer is freed by this function and is not valid - * afterward. - * - * \param thread the SDL_Thread pointer that was returned from the - * SDL_CreateThread() call that started this thread - * \param status pointer to an integer that will receive the value returned - * from the thread function by its 'return', or NULL to not - * receive such value back. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_CreateThread - * \sa SDL_DetachThread - */ -extern DECLSPEC void SDLCALL SDL_WaitThread(SDL_Thread * thread, int *status); - -/** - * Let a thread clean up on exit without intervention. - * - * A thread may be "detached" to signify that it should not remain until - * another thread has called SDL_WaitThread() on it. Detaching a thread is - * useful for long-running threads that nothing needs to synchronize with or - * further manage. When a detached thread is done, it simply goes away. - * - * There is no way to recover the return code of a detached thread. If you - * need this, don't detach the thread and instead use SDL_WaitThread(). - * - * Once a thread is detached, you should usually assume the SDL_Thread isn't - * safe to reference again, as it will become invalid immediately upon the - * detached thread's exit, instead of remaining until someone has called - * SDL_WaitThread() to finally clean it up. As such, don't detach the same - * thread more than once. - * - * If a thread has already exited when passed to SDL_DetachThread(), it will - * stop waiting for a call to SDL_WaitThread() and clean up immediately. It is - * not safe to detach a thread that might be used with SDL_WaitThread(). - * - * You may not call SDL_WaitThread() on a thread that has been detached. Use - * either that function or this one, but not both, or behavior is undefined. - * - * It is safe to pass NULL to this function; it is a no-op. - * - * \param thread the SDL_Thread pointer that was returned from the - * SDL_CreateThread() call that started this thread - * - * \since This function is available since SDL 2.0.2. - * - * \sa SDL_CreateThread - * \sa SDL_WaitThread - */ -extern DECLSPEC void SDLCALL SDL_DetachThread(SDL_Thread * thread); - -/** - * Create a piece of thread-local storage. - * - * This creates an identifier that is globally visible to all threads but - * refers to data that is thread-specific. - * - * \returns the newly created thread local storage identifier or 0 on error. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_TLSGet - * \sa SDL_TLSSet - */ -extern DECLSPEC SDL_TLSID SDLCALL SDL_TLSCreate(void); - -/** - * Get the current thread's value associated with a thread local storage ID. - * - * \param id the thread local storage ID - * \returns the value associated with the ID for the current thread or NULL if - * no value has been set; call SDL_GetError() for more information. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_TLSCreate - * \sa SDL_TLSSet - */ -extern DECLSPEC void * SDLCALL SDL_TLSGet(SDL_TLSID id); - -/** - * Set the current thread's value associated with a thread local storage ID. - * - * The function prototype for `destructor` is: - * - * ```c - * void destructor(void *value) - * ``` - * - * where its parameter `value` is what was passed as `value` to SDL_TLSSet(). - * - * \param id the thread local storage ID - * \param value the value to associate with the ID for the current thread - * \param destructor a function called when the thread exits, to free the - * value - * \returns 0 on success or a negative error code on failure; call - * SDL_GetError() for more information. - * - * \since This function is available since SDL 2.0.0. - * - * \sa SDL_TLSCreate - * \sa SDL_TLSGet - */ -extern DECLSPEC int SDLCALL SDL_TLSSet(SDL_TLSID id, const void *value, void (SDLCALL *destructor)(void*)); - -/** - * Cleanup all TLS data for this thread. - * - * \since This function is available since SDL 2.0.16. - */ -extern DECLSPEC void SDLCALL SDL_TLSCleanup(void); - -/* Ends C function definitions when using C++ */ -#ifdef __cplusplus -} -#endif -#include "close_code.h" - -#endif /* SDL_thread_h_ */ - -/* vi: set ts=4 sw=4 expandtab: */ -- cgit v1.2.3