v3.1

1 files changed, 0 insertions, 1500 deletions

diff --git a/dependencies/SDL/SDL_audio.h b/dependencies/SDL/SDL_audio.h
deleted file mode 100644
index c42de3e..0000000
--- a/dependencies/SDL/SDL_audio.h
+++ /dev/null
@@ -1,1500 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2022 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/* !!! FIXME: several functions in here need Doxygen comments. */
-
-/**
- *  \file SDL_audio.h
- *
- *  Access to the raw audio mixing buffer for the SDL library.
- */
-
-#ifndef SDL_audio_h_
-#define SDL_audio_h_
-
-#include "SDL_stdinc.h"
-#include "SDL_error.h"
-#include "SDL_endian.h"
-#include "SDL_mutex.h"
-#include "SDL_thread.h"
-#include "SDL_rwops.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- *  \brief Audio format flags.
- *
- *  These are what the 16 bits in SDL_AudioFormat currently mean...
- *  (Unspecified bits are always zero).
- *
- *  \verbatim
-    ++-----------------------sample is signed if set
-    ||
-    ||       ++-----------sample is bigendian if set
-    ||       ||
-    ||       ||          ++---sample is float if set
-    ||       ||          ||
-    ||       ||          || +---sample bit size---+
-    ||       ||          || |                     |
-    15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
-    \endverbatim
- *
- *  There are macros in SDL 2.0 and later to query these bits.
- */
-typedef Uint16 SDL_AudioFormat;
-
-/**
- *  \name Audio flags
- */
-/* @{ */
-
-#define SDL_AUDIO_MASK_BITSIZE       (0xFF)
-#define SDL_AUDIO_MASK_DATATYPE      (1<<8)
-#define SDL_AUDIO_MASK_ENDIAN        (1<<12)
-#define SDL_AUDIO_MASK_SIGNED        (1<<15)
-#define SDL_AUDIO_BITSIZE(x)         (x & SDL_AUDIO_MASK_BITSIZE)
-#define SDL_AUDIO_ISFLOAT(x)         (x & SDL_AUDIO_MASK_DATATYPE)
-#define SDL_AUDIO_ISBIGENDIAN(x)     (x & SDL_AUDIO_MASK_ENDIAN)
-#define SDL_AUDIO_ISSIGNED(x)        (x & SDL_AUDIO_MASK_SIGNED)
-#define SDL_AUDIO_ISINT(x)           (!SDL_AUDIO_ISFLOAT(x))
-#define SDL_AUDIO_ISLITTLEENDIAN(x)  (!SDL_AUDIO_ISBIGENDIAN(x))
-#define SDL_AUDIO_ISUNSIGNED(x)      (!SDL_AUDIO_ISSIGNED(x))
-
-/**
- *  \name Audio format flags
- *
- *  Defaults to LSB byte order.
- */
-/* @{ */
-#define AUDIO_U8        0x0008  /**< Unsigned 8-bit samples */
-#define AUDIO_S8        0x8008  /**< Signed 8-bit samples */
-#define AUDIO_U16LSB    0x0010  /**< Unsigned 16-bit samples */
-#define AUDIO_S16LSB    0x8010  /**< Signed 16-bit samples */
-#define AUDIO_U16MSB    0x1010  /**< As above, but big-endian byte order */
-#define AUDIO_S16MSB    0x9010  /**< As above, but big-endian byte order */
-#define AUDIO_U16       AUDIO_U16LSB
-#define AUDIO_S16       AUDIO_S16LSB
-/* @} */
-
-/**
- *  \name int32 support
- */
-/* @{ */
-#define AUDIO_S32LSB    0x8020  /**< 32-bit integer samples */
-#define AUDIO_S32MSB    0x9020  /**< As above, but big-endian byte order */
-#define AUDIO_S32       AUDIO_S32LSB
-/* @} */
-
-/**
- *  \name float32 support
- */
-/* @{ */
-#define AUDIO_F32LSB    0x8120  /**< 32-bit floating point samples */
-#define AUDIO_F32MSB    0x9120  /**< As above, but big-endian byte order */
-#define AUDIO_F32       AUDIO_F32LSB
-/* @} */
-
-/**
- *  \name Native audio byte ordering
- */
-/* @{ */
-#if SDL_BYTEORDER == SDL_LIL_ENDIAN
-#define AUDIO_U16SYS    AUDIO_U16LSB
-#define AUDIO_S16SYS    AUDIO_S16LSB
-#define AUDIO_S32SYS    AUDIO_S32LSB
-#define AUDIO_F32SYS    AUDIO_F32LSB
-#else
-#define AUDIO_U16SYS    AUDIO_U16MSB
-#define AUDIO_S16SYS    AUDIO_S16MSB
-#define AUDIO_S32SYS    AUDIO_S32MSB
-#define AUDIO_F32SYS    AUDIO_F32MSB
-#endif
-/* @} */
-
-/**
- *  \name Allow change flags
- *
- *  Which audio format changes are allowed when opening a device.
- */
-/* @{ */
-#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE    0x00000001
-#define SDL_AUDIO_ALLOW_FORMAT_CHANGE       0x00000002
-#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE     0x00000004
-#define SDL_AUDIO_ALLOW_SAMPLES_CHANGE      0x00000008
-#define SDL_AUDIO_ALLOW_ANY_CHANGE          (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE|SDL_AUDIO_ALLOW_SAMPLES_CHANGE)
-/* @} */
-
-/* @} *//* Audio flags */
-
-/**
- *  This function is called when the audio device needs more data.
- *
- *  \param userdata An application-specific parameter saved in
- *                  the SDL_AudioSpec structure
- *  \param stream A pointer to the audio data buffer.
- *  \param len    The length of that buffer in bytes.
- *
- *  Once the callback returns, the buffer will no longer be valid.
- *  Stereo samples are stored in a LRLRLR ordering.
- *
- *  You can choose to avoid callbacks and use SDL_QueueAudio() instead, if
- *  you like. Just open your audio device with a NULL callback.
- */
-typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream,
-                                            int len);
-
-/**
- *  The calculated values in this structure are calculated by SDL_OpenAudio().
- *
- *  For multi-channel audio, the default SDL channel mapping is:
- *  2:  FL FR                       (stereo)
- *  3:  FL FR LFE                   (2.1 surround)
- *  4:  FL FR BL BR                 (quad)
- *  5:  FL FR LFE BL BR             (4.1 surround)
- *  6:  FL FR FC LFE SL SR          (5.1 surround - last two can also be BL BR)
- *  7:  FL FR FC LFE BC SL SR       (6.1 surround)
- *  8:  FL FR FC LFE BL BR SL SR    (7.1 surround)
- */
-typedef struct SDL_AudioSpec
-{
-    int freq;                   /**< DSP frequency -- samples per second */
-    SDL_AudioFormat format;     /**< Audio data format */
-    Uint8 channels;             /**< Number of channels: 1 mono, 2 stereo */
-    Uint8 silence;              /**< Audio buffer silence value (calculated) */
-    Uint16 samples;             /**< Audio buffer size in sample FRAMES (total samples divided by channel count) */
-    Uint16 padding;             /**< Necessary for some compile environments */
-    Uint32 size;                /**< Audio buffer size in bytes (calculated) */
-    SDL_AudioCallback callback; /**< Callback that feeds the audio device (NULL to use SDL_QueueAudio()). */
-    void *userdata;             /**< Userdata passed to callback (ignored for NULL callbacks). */
-} SDL_AudioSpec;
-
-
-struct SDL_AudioCVT;
-typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt,
-                                          SDL_AudioFormat format);
-
-/**
- *  \brief Upper limit of filters in SDL_AudioCVT
- *
- *  The maximum number of SDL_AudioFilter functions in SDL_AudioCVT is
- *  currently limited to 9. The SDL_AudioCVT.filters array has 10 pointers,
- *  one of which is the terminating NULL pointer.
- */
-#define SDL_AUDIOCVT_MAX_FILTERS 9
-
-/**
- *  \struct SDL_AudioCVT
- *  \brief A structure to hold a set of audio conversion filters and buffers.
- *
- *  Note that various parts of the conversion pipeline can take advantage
- *  of SIMD operations (like SSE2, for example). SDL_AudioCVT doesn't require
- *  you to pass it aligned data, but can possibly run much faster if you
- *  set both its (buf) field to a pointer that is aligned to 16 bytes, and its
- *  (len) field to something that's a multiple of 16, if possible.
- */
-#if defined(__GNUC__) && !defined(__CHERI_PURE_CAPABILITY__)
-/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't
-   pad it out to 88 bytes to guarantee ABI compatibility between compilers.
-   This is not a concern on CHERI architectures, where pointers must be stored
-   at aligned locations otherwise they will become invalid, and thus structs
-   containing pointers cannot be packed without giving a warning or error.
-   vvv
-   The next time we rev the ABI, make sure to size the ints and add padding.
-*/
-#define SDL_AUDIOCVT_PACKED __attribute__((packed))
-#else
-#define SDL_AUDIOCVT_PACKED
-#endif
-/* */
-typedef struct SDL_AudioCVT
-{
-    int needed;                 /**< Set to 1 if conversion possible */
-    SDL_AudioFormat src_format; /**< Source audio format */
-    SDL_AudioFormat dst_format; /**< Target audio format */
-    double rate_incr;           /**< Rate conversion increment */
-    Uint8 *buf;                 /**< Buffer to hold entire audio data */
-    int len;                    /**< Length of original audio buffer */
-    int len_cvt;                /**< Length of converted audio buffer */
-    int len_mult;               /**< buffer must be len*len_mult big */
-    double len_ratio;           /**< Given len, final size is len*len_ratio */
-    SDL_AudioFilter filters[SDL_AUDIOCVT_MAX_FILTERS + 1]; /**< NULL-terminated list of filter functions */
-    int filter_index;           /**< Current audio conversion function */
-} SDL_AUDIOCVT_PACKED SDL_AudioCVT;
-
-
-/* Function prototypes */
-
-/**
- *  \name Driver discovery functions
- *
- *  These functions return the list of built in audio drivers, in the
- *  order that they are normally initialized by default.
- */
-/* @{ */
-
-/**
- * Use this function to get the number of built-in audio drivers.
- *
- * This function returns a hardcoded number. This never returns a negative
- * value; if there are no drivers compiled into this build of SDL, this
- * function returns zero. The presence of a driver in this list does not mean
- * it will function, it just means SDL is capable of interacting with that
- * interface. For example, a build of SDL might have esound support, but if
- * there's no esound server available, SDL's esound driver would fail if used.
- *
- * By default, SDL tries all drivers, in its preferred order, until one is
- * found to be usable.
- *
- * \returns the number of built-in audio drivers.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetAudioDriver
- */
-extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void);
-
-/**
- * Use this function to get the name of a built in audio driver.
- *
- * The list of audio drivers is given in the order that they are normally
- * initialized by default; the drivers that seem more reasonable to choose
- * first (as far as the SDL developers believe) are earlier in the list.
- *
- * The names of drivers are all simple, low-ASCII identifiers, like "alsa",
- * "coreaudio" or "xaudio2". These never have Unicode characters, and are not
- * meant to be proper names.
- *
- * \param index the index of the audio driver; the value ranges from 0 to
- *              SDL_GetNumAudioDrivers() - 1
- * \returns the name of the audio driver at the requested index, or NULL if an
- *          invalid index was specified.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetNumAudioDrivers
- */
-extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index);
-/* @} */
-
-/**
- *  \name Initialization and cleanup
- *
- *  \internal These functions are used internally, and should not be used unless
- *            you have a specific need to specify the audio driver you want to
- *            use.  You should normally use SDL_Init() or SDL_InitSubSystem().
- */
-/* @{ */
-
-/**
- * Use this function to initialize a particular audio driver.
- *
- * This function is used internally, and should not be used unless you have a
- * specific need to designate the audio driver you want to use. You should
- * normally use SDL_Init() or SDL_InitSubSystem().
- *
- * \param driver_name the name of the desired audio driver
- * \returns 0 on success or a negative error code on failure; call
- *          SDL_GetError() for more information.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_AudioQuit
- */
-extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name);
-
-/**
- * Use this function to shut down audio if you initialized it with
- * SDL_AudioInit().
- *
- * This function is used internally, and should not be used unless you have a
- * specific need to specify the audio driver you want to use. You should
- * normally use SDL_Quit() or SDL_QuitSubSystem().
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_AudioInit
- */
-extern DECLSPEC void SDLCALL SDL_AudioQuit(void);
-/* @} */
-
-/**
- * Get the name of the current audio driver.
- *
- * The returned string points to internal static memory and thus never becomes
- * invalid, even if you quit the audio subsystem and initialize a new driver
- * (although such a case would return a different static string from another
- * call to this function, of course). As such, you should not modify or free
- * the returned string.
- *
- * \returns the name of the current audio driver or NULL if no driver has been
- *          initialized.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_AudioInit
- */
-extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void);
-
-/**
- * This function is a legacy means of opening the audio device.
- *
- * This function remains for compatibility with SDL 1.2, but also because it's
- * slightly easier to use than the new functions in SDL 2.0. The new, more
- * powerful, and preferred way to do this is SDL_OpenAudioDevice().
- *
- * This function is roughly equivalent to:
- *
- * ```c
- * SDL_OpenAudioDevice(NULL, 0, desired, obtained, SDL_AUDIO_ALLOW_ANY_CHANGE);
- * ```
- *
- * With two notable exceptions:
- *
- * - If `obtained` is NULL, we use `desired` (and allow no changes), which
- *   means desired will be modified to have the correct values for silence,
- *   etc, and SDL will convert any differences between your app's specific
- *   request and the hardware behind the scenes.
- * - The return value is always success or failure, and not a device ID, which
- *   means you can only have one device open at a time with this function.
- *
- * \param desired an SDL_AudioSpec structure representing the desired output
- *                format. Please refer to the SDL_OpenAudioDevice
- *                documentation for details on how to prepare this structure.
- * \param obtained an SDL_AudioSpec structure filled in with the actual
- *                 parameters, or NULL.
- * \returns 0 if successful, placing the actual hardware parameters in the
- *          structure pointed to by `obtained`.
- *
- *          If `obtained` is NULL, the audio data passed to the callback
- *          function will be guaranteed to be in the requested format, and
- *          will be automatically converted to the actual hardware audio
- *          format if necessary. If `obtained` is NULL, `desired` will have
- *          fields modified.
- *
- *          This function returns a negative error code on failure to open the
- *          audio device or failure to set up the audio thread; call
- *          SDL_GetError() for more information.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_CloseAudio
- * \sa SDL_LockAudio
- * \sa SDL_PauseAudio
- * \sa SDL_UnlockAudio
- */
-extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired,
-                                          SDL_AudioSpec * obtained);
-
-/**
- *  SDL Audio Device IDs.
- *
- *  A successful call to SDL_OpenAudio() is always device id 1, and legacy
- *  SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls
- *  always returns devices >= 2 on success. The legacy calls are good both
- *  for backwards compatibility and when you don't care about multiple,
- *  specific, or capture devices.
- */
-typedef Uint32 SDL_AudioDeviceID;
-
-/**
- * Get the number of built-in audio devices.
- *
- * This function is only valid after successfully initializing the audio
- * subsystem.
- *
- * Note that audio capture support is not implemented as of SDL 2.0.4, so the
- * `iscapture` parameter is for future expansion and should always be zero for
- * now.
- *
- * This function will return -1 if an explicit list of devices can't be
- * determined. Returning -1 is not an error. For example, if SDL is set up to
- * talk to a remote audio server, it can't list every one available on the
- * Internet, but it will still allow a specific host to be specified in
- * SDL_OpenAudioDevice().
- *
- * In many common cases, when this function returns a value <= 0, it can still
- * successfully open the default device (NULL for first argument of
- * SDL_OpenAudioDevice()).
- *
- * This function may trigger a complete redetect of available hardware. It
- * should not be called for each iteration of a loop, but rather once at the
- * start of a loop:
- *
- * ```c
- * // Don't do this:
- * for (int i = 0; i < SDL_GetNumAudioDevices(0); i++)
- *
- * // do this instead:
- * const int count = SDL_GetNumAudioDevices(0);
- * for (int i = 0; i < count; ++i) { do_something_here(); }
- * ```
- *
- * \param iscapture zero to request playback devices, non-zero to request
- *                  recording devices
- * \returns the number of available devices exposed by the current driver or
- *          -1 if an explicit list of devices can't be determined. A return
- *          value of -1 does not necessarily mean an error condition.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetAudioDeviceName
- * \sa SDL_OpenAudioDevice
- */
-extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture);
-
-/**
- * Get the human-readable name of a specific audio device.
- *
- * This function is only valid after successfully initializing the audio
- * subsystem. The values returned by this function reflect the latest call to
- * SDL_GetNumAudioDevices(); re-call that function to redetect available
- * hardware.
- *
- * The string returned by this function is UTF-8 encoded, read-only, and
- * managed internally. You are not to free it. If you need to keep the string
- * for any length of time, you should make your own copy of it, as it will be
- * invalid next time any of several other SDL functions are called.
- *
- * \param index the index of the audio device; valid values range from 0 to
- *              SDL_GetNumAudioDevices() - 1
- * \param iscapture non-zero to query the list of recording devices, zero to
- *                  query the list of output devices.
- * \returns the name of the audio device at the requested index, or NULL on
- *          error.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetNumAudioDevices
- * \sa SDL_GetDefaultAudioInfo
- */
-extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index,
-                                                           int iscapture);
-
-/**
- * Get the preferred audio format of a specific audio device.
- *
- * This function is only valid after a successfully initializing the audio
- * subsystem. The values returned by this function reflect the latest call to
- * SDL_GetNumAudioDevices(); re-call that function to redetect available
- * hardware.
- *
- * `spec` will be filled with the sample rate, sample format, and channel
- * count.
- *
- * \param index the index of the audio device; valid values range from 0 to
- *              SDL_GetNumAudioDevices() - 1
- * \param iscapture non-zero to query the list of recording devices, zero to
- *                  query the list of output devices.
- * \param spec The SDL_AudioSpec to be initialized by this function.
- * \returns 0 on success, nonzero on error
- *
- * \since This function is available since SDL 2.0.16.
- *
- * \sa SDL_GetNumAudioDevices
- * \sa SDL_GetDefaultAudioInfo
- */
-extern DECLSPEC int SDLCALL SDL_GetAudioDeviceSpec(int index,
-                                                   int iscapture,
-                                                   SDL_AudioSpec *spec);
-
-
-/**
- * Get the name and preferred format of the default audio device.
- *
- * Some (but not all!) platforms have an isolated mechanism to get information
- * about the "default" device. This can actually be a completely different
- * device that's not in the list you get from SDL_GetAudioDeviceSpec(). It can
- * even be a network address! (This is discussed in SDL_OpenAudioDevice().)
- *
- * As a result, this call is not guaranteed to be performant, as it can query
- * the sound server directly every time, unlike the other query functions. You
- * should call this function sparingly!
- *
- * `spec` will be filled with the sample rate, sample format, and channel
- * count, if a default device exists on the system. If `name` is provided,
- * will be filled with either a dynamically-allocated UTF-8 string or NULL.
- *
- * \param name A pointer to be filled with the name of the default device (can
- *             be NULL). Please call SDL_free() when you are done with this
- *             pointer!
- * \param spec The SDL_AudioSpec to be initialized by this function.
- * \param iscapture non-zero to query the default recording device, zero to
- *                  query the default output device.
- * \returns 0 on success, nonzero on error
- *
- * \since This function is available since SDL 2.24.0.
- *
- * \sa SDL_GetAudioDeviceName
- * \sa SDL_GetAudioDeviceSpec
- * \sa SDL_OpenAudioDevice
- */
-extern DECLSPEC int SDLCALL SDL_GetDefaultAudioInfo(char **name,
-                                                    SDL_AudioSpec *spec,
-                                                    int iscapture);
-
-
-/**
- * Open a specific audio device.
- *
- * SDL_OpenAudio(), unlike this function, always acts on device ID 1. As such,
- * this function will never return a 1 so as not to conflict with the legacy
- * function.
- *
- * Please note that SDL 2.0 before 2.0.5 did not support recording; as such,
- * this function would fail if `iscapture` was not zero. Starting with SDL
- * 2.0.5, recording is implemented and this value can be non-zero.
- *
- * Passing in a `device` name of NULL requests the most reasonable default
- * (and is equivalent to what SDL_OpenAudio() does to choose a device). The
- * `device` name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but
- * some drivers allow arbitrary and driver-specific strings, such as a
- * hostname/IP address for a remote audio server, or a filename in the
- * diskaudio driver.
- *
- * An opened audio device starts out paused, and should be enabled for playing
- * by calling SDL_PauseAudioDevice(devid, 0) when you are ready for your audio
- * callback function to be called. Since the audio driver may modify the
- * requested size of the audio buffer, you should allocate any local mixing
- * buffers after you open the audio device.
- *
- * The audio callback runs in a separate thread in most cases; you can prevent
- * race conditions between your callback and other threads without fully
- * pausing playback with SDL_LockAudioDevice(). For more information about the
- * callback, see SDL_AudioSpec.
- *
- * Managing the audio spec via 'desired' and 'obtained':
- *
- * When filling in the desired audio spec structure:
- *
- * - `desired->freq` should be the frequency in sample-frames-per-second (Hz).
- * - `desired->format` should be the audio format (`AUDIO_S16SYS`, etc).
- * - `desired->samples` is the desired size of the audio buffer, in _sample
- *   frames_ (with stereo output, two samples--left and right--would make a
- *   single sample frame). This number should be a power of two, and may be
- *   adjusted by the audio driver to a value more suitable for the hardware.
- *   Good values seem to range between 512 and 8096 inclusive, depending on
- *   the application and CPU speed. Smaller values reduce latency, but can
- *   lead to underflow if the application is doing heavy processing and cannot
- *   fill the audio buffer in time. Note that the number of sample frames is
- *   directly related to time by the following formula: `ms =
- *   (sampleframes*1000)/freq`
- * - `desired->size` is the size in _bytes_ of the audio buffer, and is
- *   calculated by SDL_OpenAudioDevice(). You don't initialize this.
- * - `desired->silence` is the value used to set the buffer to silence, and is
- *   calculated by SDL_OpenAudioDevice(). You don't initialize this.
- * - `desired->callback` should be set to a function that will be called when
- *   the audio device is ready for more data. It is passed a pointer to the
- *   audio buffer, and the length in bytes of the audio buffer. This function
- *   usually runs in a separate thread, and so you should protect data
- *   structures that it accesses by calling SDL_LockAudioDevice() and
- *   SDL_UnlockAudioDevice() in your code. Alternately, you may pass a NULL
- *   pointer here, and call SDL_QueueAudio() with some frequency, to queue
- *   more audio samples to be played (or for capture devices, call
- *   SDL_DequeueAudio() with some frequency, to obtain audio samples).
- * - `desired->userdata` is passed as the first parameter to your callback
- *   function. If you passed a NULL callback, this value is ignored.
- *
- * `allowed_changes` can have the following flags OR'd together:
- *
- * - `SDL_AUDIO_ALLOW_FREQUENCY_CHANGE`
- * - `SDL_AUDIO_ALLOW_FORMAT_CHANGE`
- * - `SDL_AUDIO_ALLOW_CHANNELS_CHANGE`
- * - `SDL_AUDIO_ALLOW_SAMPLES_CHANGE`
- * - `SDL_AUDIO_ALLOW_ANY_CHANGE`
- *
- * These flags specify how SDL should behave when a device cannot offer a
- * specific feature. If the application requests a feature that the hardware
- * doesn't offer, SDL will always try to get the closest equivalent.
- *
- * For example, if you ask for float32 audio format, but the sound card only
- * supports int16, SDL will set the hardware to int16. If you had set
- * SDL_AUDIO_ALLOW_FORMAT_CHANGE, SDL will change the format in the `obtained`
- * structure. If that flag was *not* set, SDL will prepare to convert your
- * callback's float32 audio to int16 before feeding it to the hardware and
- * will keep the originally requested format in the `obtained` structure.
- *
- * The resulting audio specs, varying depending on hardware and on what
- * changes were allowed, will then be written back to `obtained`.
- *
- * If your application can only handle one specific data format, pass a zero
- * for `allowed_changes` and let SDL transparently handle any differences.
- *
- * \param device a UTF-8 string reported by SDL_GetAudioDeviceName() or a
- *               driver-specific name as appropriate. NULL requests the most
- *               reasonable default device.
- * \param iscapture non-zero to specify a device should be opened for
- *                  recording, not playback
- * \param desired an SDL_AudioSpec structure representing the desired output
- *                format; see SDL_OpenAudio() for more information
- * \param obtained an SDL_AudioSpec structure filled in with the actual output
- *                 format; see SDL_OpenAudio() for more information
- * \param allowed_changes 0, or one or more flags OR'd together
- * \returns a valid device ID that is > 0 on success or 0 on failure; call
- *          SDL_GetError() for more information.
- *
- *          For compatibility with SDL 1.2, this will never return 1, since
- *          SDL reserves that ID for the legacy SDL_OpenAudio() function.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_CloseAudioDevice
- * \sa SDL_GetAudioDeviceName
- * \sa SDL_LockAudioDevice
- * \sa SDL_OpenAudio
- * \sa SDL_PauseAudioDevice
- * \sa SDL_UnlockAudioDevice
- */
-extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice(
-                                                  const char *device,
-                                                  int iscapture,
-                                                  const SDL_AudioSpec *desired,
-                                                  SDL_AudioSpec *obtained,
-                                                  int allowed_changes);
-
-
-
-/**
- *  \name Audio state
- *
- *  Get the current audio state.
- */
-/* @{ */
-typedef enum
-{
-    SDL_AUDIO_STOPPED = 0,
-    SDL_AUDIO_PLAYING,
-    SDL_AUDIO_PAUSED
-} SDL_AudioStatus;
-
-/**
- * This function is a legacy means of querying the audio device.
- *
- * New programs might want to use SDL_GetAudioDeviceStatus() instead. This
- * function is equivalent to calling...
- *
- * ```c
- * SDL_GetAudioDeviceStatus(1);
- * ```
- *
- * ...and is only useful if you used the legacy SDL_OpenAudio() function.
- *
- * \returns the SDL_AudioStatus of the audio device opened by SDL_OpenAudio().
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetAudioDeviceStatus
- */
-extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void);
-
-/**
- * Use this function to get the current audio state of an audio device.
- *
- * \param dev the ID of an audio device previously opened with
- *            SDL_OpenAudioDevice()
- * \returns the SDL_AudioStatus of the specified audio device.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_PauseAudioDevice
- */
-extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev);
-/* @} *//* Audio State */
-
-/**
- *  \name Pause audio functions
- *
- *  These functions pause and unpause the audio callback processing.
- *  They should be called with a parameter of 0 after opening the audio
- *  device to start playing sound.  This is so you can safely initialize
- *  data for your callback function after opening the audio device.
- *  Silence will be written to the audio device during the pause.
- */
-/* @{ */
-
-/**
- * This function is a legacy means of pausing the audio device.
- *
- * New programs might want to use SDL_PauseAudioDevice() instead. This
- * function is equivalent to calling...
- *
- * ```c
- * SDL_PauseAudioDevice(1, pause_on);
- * ```
- *
- * ...and is only useful if you used the legacy SDL_OpenAudio() function.
- *
- * \param pause_on non-zero to pause, 0 to unpause
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_GetAudioStatus
- * \sa SDL_PauseAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on);
-
-/**
- * Use this function to pause and unpause audio playback on a specified
- * device.
- *
- * This function pauses and unpauses the audio callback processing for a given
- * device. Newly-opened audio devices start in the paused state, so you must
- * call this function with **pause_on**=0 after opening the specified audio
- * device to start playing sound. This allows you to safely initialize data
- * for your callback function after opening the audio device. Silence will be
- * written to the audio device while paused, and the audio callback is
- * guaranteed to not be called. Pausing one device does not prevent other
- * unpaused devices from running their callbacks.
- *
- * Pausing state does not stack; even if you pause a device several times, a
- * single unpause will start the device playing again, and vice versa. This is
- * different from how SDL_LockAudioDevice() works.
- *
- * If you just need to protect a few variables from race conditions vs your
- * callback, you shouldn't pause the audio device, as it will lead to dropouts
- * in the audio playback. Instead, you should use SDL_LockAudioDevice().
- *
- * \param dev a device opened by SDL_OpenAudioDevice()
- * \param pause_on non-zero to pause, 0 to unpause
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_LockAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev,
-                                                  int pause_on);
-/* @} *//* Pause audio functions */
-
-/**
- * Load the audio data of a WAVE file into memory.
- *
- * Loading a WAVE file requires `src`, `spec`, `audio_buf` and `audio_len` to
- * be valid pointers. The entire data portion of the file is then loaded into
- * memory and decoded if necessary.
- *
- * If `freesrc` is non-zero, the data source gets automatically closed and
- * freed before the function returns.
- *
- * Supported formats are RIFF WAVE files with the formats PCM (8, 16, 24, and
- * 32 bits), IEEE Float (32 bits), Microsoft ADPCM and IMA ADPCM (4 bits), and
- * A-law and mu-law (8 bits). Other formats are currently unsupported and
- * cause an error.
- *
- * If this function succeeds, the pointer returned by it is equal to `spec`
- * and the pointer to the audio data allocated by the function is written to
- * `audio_buf` and its length in bytes to `audio_len`. The SDL_AudioSpec
- * members `freq`, `channels`, and `format` are set to the values of the audio
- * data in the buffer. The `samples` member is set to a sane default and all
- * others are set to zero.
- *
- * It's necessary to use SDL_FreeWAV() to free the audio data returned in
- * `audio_buf` when it is no longer used.
- *
- * Because of the underspecification of the .WAV format, there are many
- * problematic files in the wild that cause issues with strict decoders. To
- * provide compatibility with these files, this decoder is lenient in regards
- * to the truncation of the file, the fact chunk, and the size of the RIFF
- * chunk. The hints `SDL_HINT_WAVE_RIFF_CHUNK_SIZE`,
- * `SDL_HINT_WAVE_TRUNCATION`, and `SDL_HINT_WAVE_FACT_CHUNK` can be used to
- * tune the behavior of the loading process.
- *
- * Any file that is invalid (due to truncation, corruption, or wrong values in
- * the headers), too big, or unsupported causes an error. Additionally, any
- * critical I/O error from the data source will terminate the loading process
- * with an error. The function returns NULL on error and in all cases (with
- * the exception of `src` being NULL), an appropriate error message will be
- * set.
- *
- * It is required that the data source supports seeking.
- *
- * Example:
- *
- * ```c
- * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, &spec, &buf, &len);
- * ```
- *
- * Note that the SDL_LoadWAV macro does this same thing for you, but in a less
- * messy way:
- *
- * ```c
- * SDL_LoadWAV("sample.wav", &spec, &buf, &len);
- * ```
- *
- * \param src The data source for the WAVE data
- * \param freesrc If non-zero, SDL will _always_ free the data source
- * \param spec An SDL_AudioSpec that will be filled in with the wave file's
- *             format details
- * \param audio_buf A pointer filled with the audio data, allocated by the
- *                  function.
- * \param audio_len A pointer filled with the length of the audio data buffer
- *                  in bytes
- * \returns This function, if successfully called, returns `spec`, which will
- *          be filled with the audio data format of the wave source data.
- *          `audio_buf` will be filled with a pointer to an allocated buffer
- *          containing the audio data, and `audio_len` is filled with the
- *          length of that audio buffer in bytes.
- *
- *          This function returns NULL if the .WAV file cannot be opened, uses
- *          an unknown data format, or is corrupt; call SDL_GetError() for
- *          more information.
- *
- *          When the application is done with the data returned in
- *          `audio_buf`, it should call SDL_FreeWAV() to dispose of it.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_FreeWAV
- * \sa SDL_LoadWAV
- */
-extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src,
-                                                      int freesrc,
-                                                      SDL_AudioSpec * spec,
-                                                      Uint8 ** audio_buf,
-                                                      Uint32 * audio_len);
-
-/**
- *  Loads a WAV from a file.
- *  Compatibility convenience function.
- */
-#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \
-    SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len)
-
-/**
- * Free data previously allocated with SDL_LoadWAV() or SDL_LoadWAV_RW().
- *
- * After a WAVE file has been opened with SDL_LoadWAV() or SDL_LoadWAV_RW()
- * its data can eventually be freed with SDL_FreeWAV(). It is safe to call
- * this function with a NULL pointer.
- *
- * \param audio_buf a pointer to the buffer created by SDL_LoadWAV() or
- *                  SDL_LoadWAV_RW()
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_LoadWAV
- * \sa SDL_LoadWAV_RW
- */
-extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf);
-
-/**
- * Initialize an SDL_AudioCVT structure for conversion.
- *
- * Before an SDL_AudioCVT structure can be used to convert audio data it must
- * be initialized with source and destination information.
- *
- * This function will zero out every field of the SDL_AudioCVT, so it must be
- * called before the application fills in the final buffer information.
- *
- * Once this function has returned successfully, and reported that a
- * conversion is necessary, the application fills in the rest of the fields in
- * SDL_AudioCVT, now that it knows how large a buffer it needs to allocate,
- * and then can call SDL_ConvertAudio() to complete the conversion.
- *
- * \param cvt an SDL_AudioCVT structure filled in with audio conversion
- *            information
- * \param src_format the source format of the audio data; for more info see
- *                   SDL_AudioFormat
- * \param src_channels the number of channels in the source
- * \param src_rate the frequency (sample-frames-per-second) of the source
- * \param dst_format the destination format of the audio data; for more info
- *                   see SDL_AudioFormat
- * \param dst_channels the number of channels in the destination
- * \param dst_rate the frequency (sample-frames-per-second) of the destination
- * \returns 1 if the audio filter is prepared, 0 if no conversion is needed,
- *          or a negative error code on failure; call SDL_GetError() for more
- *          information.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_ConvertAudio
- */
-extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt,
-                                              SDL_AudioFormat src_format,
-                                              Uint8 src_channels,
-                                              int src_rate,
-                                              SDL_AudioFormat dst_format,
-                                              Uint8 dst_channels,
-                                              int dst_rate);
-
-/**
- * Convert audio data to a desired audio format.
- *
- * This function does the actual audio data conversion, after the application
- * has called SDL_BuildAudioCVT() to prepare the conversion information and
- * then filled in the buffer details.
- *
- * Once the application has initialized the `cvt` structure using
- * SDL_BuildAudioCVT(), allocated an audio buffer and filled it with audio
- * data in the source format, this function will convert the buffer, in-place,
- * to the desired format.
- *
- * The data conversion may go through several passes; any given pass may
- * possibly temporarily increase the size of the data. For example, SDL might
- * expand 16-bit data to 32 bits before resampling to a lower frequency,
- * shrinking the data size after having grown it briefly. Since the supplied
- * buffer will be both the source and destination, converting as necessary
- * in-place, the application must allocate a buffer that will fully contain
- * the data during its largest conversion pass. After SDL_BuildAudioCVT()
- * returns, the application should set the `cvt->len` field to the size, in
- * bytes, of the source data, and allocate a buffer that is `cvt->len *
- * cvt->len_mult` bytes long for the `buf` field.
- *
- * The source data should be copied into this buffer before the call to
- * SDL_ConvertAudio(). Upon successful return, this buffer will contain the
- * converted audio, and `cvt->len_cvt` will be the size of the converted data,
- * in bytes. Any bytes in the buffer past `cvt->len_cvt` are undefined once
- * this function returns.
- *
- * \param cvt an SDL_AudioCVT structure that was previously set up by
- *            SDL_BuildAudioCVT().
- * \returns 0 if the conversion was completed successfully or a negative error
- *          code on failure; call SDL_GetError() for more information.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_BuildAudioCVT
- */
-extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt);
-
-/* SDL_AudioStream is a new audio conversion interface.
-   The benefits vs SDL_AudioCVT:
-    - it can handle resampling data in chunks without generating
-      artifacts, when it doesn't have the complete buffer available.
-    - it can handle incoming data in any variable size.
-    - You push data as you have it, and pull it when you need it
- */
-/* this is opaque to the outside world. */
-struct _SDL_AudioStream;
-typedef struct _SDL_AudioStream SDL_AudioStream;
-
-/**
- * Create a new audio stream.
- *
- * \param src_format The format of the source audio
- * \param src_channels The number of channels of the source audio
- * \param src_rate The sampling rate of the source audio
- * \param dst_format The format of the desired audio output
- * \param dst_channels The number of channels of the desired audio output
- * \param dst_rate The sampling rate of the desired audio output
- * \returns 0 on success, or -1 on error.
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamFlush
- * \sa SDL_AudioStreamClear
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC SDL_AudioStream * SDLCALL SDL_NewAudioStream(const SDL_AudioFormat src_format,
-                                           const Uint8 src_channels,
-                                           const int src_rate,
-                                           const SDL_AudioFormat dst_format,
-                                           const Uint8 dst_channels,
-                                           const int dst_rate);
-
-/**
- * Add data to be converted/resampled to the stream.
- *
- * \param stream The stream the audio data is being added to
- * \param buf A pointer to the audio data to add
- * \param len The number of bytes to write to the stream
- * \returns 0 on success, or -1 on error.
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamFlush
- * \sa SDL_AudioStreamClear
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC int SDLCALL SDL_AudioStreamPut(SDL_AudioStream *stream, const void *buf, int len);
-
-/**
- * Get converted/resampled data from the stream
- *
- * \param stream The stream the audio is being requested from
- * \param buf A buffer to fill with audio data
- * \param len The maximum number of bytes to fill
- * \returns the number of bytes read from the stream, or -1 on error
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamFlush
- * \sa SDL_AudioStreamClear
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC int SDLCALL SDL_AudioStreamGet(SDL_AudioStream *stream, void *buf, int len);
-
-/**
- * Get the number of converted/resampled bytes available.
- *
- * The stream may be buffering data behind the scenes until it has enough to
- * resample correctly, so this number might be lower than what you expect, or
- * even be zero. Add more data or flush the stream if you need the data now.
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamFlush
- * \sa SDL_AudioStreamClear
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC int SDLCALL SDL_AudioStreamAvailable(SDL_AudioStream *stream);
-
-/**
- * Tell the stream that you're done sending data, and anything being buffered
- * should be converted/resampled and made available immediately.
- *
- * It is legal to add more data to a stream after flushing, but there will be
- * audio gaps in the output. Generally this is intended to signal the end of
- * input, so the complete output becomes available.
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamClear
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC int SDLCALL SDL_AudioStreamFlush(SDL_AudioStream *stream);
-
-/**
- * Clear any pending data in the stream without converting it
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamFlush
- * \sa SDL_FreeAudioStream
- */
-extern DECLSPEC void SDLCALL SDL_AudioStreamClear(SDL_AudioStream *stream);
-
-/**
- * Free an audio stream
- *
- * \since This function is available since SDL 2.0.7.
- *
- * \sa SDL_NewAudioStream
- * \sa SDL_AudioStreamPut
- * \sa SDL_AudioStreamGet
- * \sa SDL_AudioStreamAvailable
- * \sa SDL_AudioStreamFlush
- * \sa SDL_AudioStreamClear
- */
-extern DECLSPEC void SDLCALL SDL_FreeAudioStream(SDL_AudioStream *stream);
-
-#define SDL_MIX_MAXVOLUME 128
-
-/**
- * This function is a legacy means of mixing audio.
- *
- * This function is equivalent to calling...
- *
- * ```c
- * SDL_MixAudioFormat(dst, src, format, len, volume);
- * ```
- *
- * ...where `format` is the obtained format of the audio device from the
- * legacy SDL_OpenAudio() function.
- *
- * \param dst the destination for the mixed audio
- * \param src the source audio buffer to be mixed
- * \param len the length of the audio buffer in bytes
- * \param volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME
- *               for full audio volume
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_MixAudioFormat
- */
-extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src,
-                                          Uint32 len, int volume);
-
-/**
- * Mix audio data in a specified format.
- *
- * This takes an audio buffer `src` of `len` bytes of `format` data and mixes
- * it into `dst`, performing addition, volume adjustment, and overflow
- * clipping. The buffer pointed to by `dst` must also be `len` bytes of
- * `format` data.
- *
- * This is provided for convenience -- you can mix your own audio data.
- *
- * Do not use this function for mixing together more than two streams of
- * sample data. The output from repeated application of this function may be
- * distorted by clipping, because there is no accumulator with greater range
- * than the input (not to mention this being an inefficient way of doing it).
- *
- * It is a common misconception that this function is required to write audio
- * data to an output stream in an audio callback. While you can do that,
- * SDL_MixAudioFormat() is really only needed when you're mixing a single
- * audio stream with a volume adjustment.
- *
- * \param dst the destination for the mixed audio
- * \param src the source audio buffer to be mixed
- * \param format the SDL_AudioFormat structure representing the desired audio
- *               format
- * \param len the length of the audio buffer in bytes
- * \param volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME
- *               for full audio volume
- *
- * \since This function is available since SDL 2.0.0.
- */
-extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst,
-                                                const Uint8 * src,
-                                                SDL_AudioFormat format,
-                                                Uint32 len, int volume);
-
-/**
- * Queue more audio on non-callback devices.
- *
- * If you are looking to retrieve queued audio from a non-callback capture
- * device, you want SDL_DequeueAudio() instead. SDL_QueueAudio() will return
- * -1 to signify an error if you use it with capture devices.
- *
- * SDL offers two ways to feed audio to the device: you can either supply a
- * callback that SDL triggers with some frequency to obtain more audio (pull
- * method), or you can supply no callback, and then SDL will expect you to
- * supply data at regular intervals (push method) with this function.
- *
- * There are no limits on the amount of data you can queue, short of
- * exhaustion of address space. Queued data will drain to the device as
- * necessary without further intervention from you. If the device needs audio
- * but there is not enough queued, it will play silence to make up the
- * difference. This means you will have skips in your audio playback if you
- * aren't routinely queueing sufficient data.
- *
- * This function copies the supplied data, so you are safe to free it when the
- * function returns. This function is thread-safe, but queueing to the same
- * device from two threads at once does not promise which buffer will be
- * queued first.
- *
- * You may not queue audio on a device that is using an application-supplied
- * callback; doing so returns an error. You have to use the audio callback or
- * queue audio with this function, but not both.
- *
- * You should not call SDL_LockAudio() on the device before queueing; SDL
- * handles locking internally for this function.
- *
- * Note that SDL2 does not support planar audio. You will need to resample
- * from planar audio formats into a non-planar one (see SDL_AudioFormat)
- * before queuing audio.
- *
- * \param dev the device ID to which we will queue audio
- * \param data the data to queue to the device for later playback
- * \param len the number of bytes (not samples!) to which `data` points
- * \returns 0 on success or a negative error code on failure; call
- *          SDL_GetError() for more information.
- *
- * \since This function is available since SDL 2.0.4.
- *
- * \sa SDL_ClearQueuedAudio
- * \sa SDL_GetQueuedAudioSize
- */
-extern DECLSPEC int SDLCALL SDL_QueueAudio(SDL_AudioDeviceID dev, const void *data, Uint32 len);
-
-/**
- * Dequeue more audio on non-callback devices.
- *
- * If you are looking to queue audio for output on a non-callback playback
- * device, you want SDL_QueueAudio() instead. SDL_DequeueAudio() will always
- * return 0 if you use it with playback devices.
- *
- * SDL offers two ways to retrieve audio from a capture device: you can either
- * supply a callback that SDL triggers with some frequency as the device
- * records more audio data, (push method), or you can supply no callback, and
- * then SDL will expect you to retrieve data at regular intervals (pull
- * method) with this function.
- *
- * There are no limits on the amount of data you can queue, short of
- * exhaustion of address space. Data from the device will keep queuing as
- * necessary without further intervention from you. This means you will
- * eventually run out of memory if you aren't routinely dequeueing data.
- *
- * Capture devices will not queue data when paused; if you are expecting to
- * not need captured audio for some length of time, use SDL_PauseAudioDevice()
- * to stop the capture device from queueing more data. This can be useful
- * during, say, level loading times. When unpaused, capture devices will start
- * queueing data from that point, having flushed any capturable data available
- * while paused.
- *
- * This function is thread-safe, but dequeueing from the same device from two
- * threads at once does not promise which thread will dequeue data first.
- *
- * You may not dequeue audio from a device that is using an
- * application-supplied callback; doing so returns an error. You have to use
- * the audio callback, or dequeue audio with this function, but not both.
- *
- * You should not call SDL_LockAudio() on the device before dequeueing; SDL
- * handles locking internally for this function.
- *
- * \param dev the device ID from which we will dequeue audio
- * \param data a pointer into where audio data should be copied
- * \param len the number of bytes (not samples!) to which (data) points
- * \returns the number of bytes dequeued, which could be less than requested;
- *          call SDL_GetError() for more information.
- *
- * \since This function is available since SDL 2.0.5.
- *
- * \sa SDL_ClearQueuedAudio
- * \sa SDL_GetQueuedAudioSize
- */
-extern DECLSPEC Uint32 SDLCALL SDL_DequeueAudio(SDL_AudioDeviceID dev, void *data, Uint32 len);
-
-/**
- * Get the number of bytes of still-queued audio.
- *
- * For playback devices: this is the number of bytes that have been queued for
- * playback with SDL_QueueAudio(), but have not yet been sent to the hardware.
- *
- * Once we've sent it to the hardware, this function can not decide the exact
- * byte boundary of what has been played. It's possible that we just gave the
- * hardware several kilobytes right before you called this function, but it
- * hasn't played any of it yet, or maybe half of it, etc.
- *
- * For capture devices, this is the number of bytes that have been captured by
- * the device and are waiting for you to dequeue. This number may grow at any
- * time, so this only informs of the lower-bound of available data.
- *
- * You may not queue or dequeue audio on a device that is using an
- * application-supplied callback; calling this function on such a device
- * always returns 0. You have to use the audio callback or queue audio, but
- * not both.
- *
- * You should not call SDL_LockAudio() on the device before querying; SDL
- * handles locking internally for this function.
- *
- * \param dev the device ID of which we will query queued audio size
- * \returns the number of bytes (not samples!) of queued audio.
- *
- * \since This function is available since SDL 2.0.4.
- *
- * \sa SDL_ClearQueuedAudio
- * \sa SDL_QueueAudio
- * \sa SDL_DequeueAudio
- */
-extern DECLSPEC Uint32 SDLCALL SDL_GetQueuedAudioSize(SDL_AudioDeviceID dev);
-
-/**
- * Drop any queued audio data waiting to be sent to the hardware.
- *
- * Immediately after this call, SDL_GetQueuedAudioSize() will return 0. For
- * output devices, the hardware will start playing silence if more audio isn't
- * queued. For capture devices, the hardware will start filling the empty
- * queue with new data if the capture device isn't paused.
- *
- * This will not prevent playback of queued audio that's already been sent to
- * the hardware, as we can not undo that, so expect there to be some fraction
- * of a second of audio that might still be heard. This can be useful if you
- * want to, say, drop any pending music or any unprocessed microphone input
- * during a level change in your game.
- *
- * You may not queue or dequeue audio on a device that is using an
- * application-supplied callback; calling this function on such a device
- * always returns 0. You have to use the audio callback or queue audio, but
- * not both.
- *
- * You should not call SDL_LockAudio() on the device before clearing the
- * queue; SDL handles locking internally for this function.
- *
- * This function always succeeds and thus returns void.
- *
- * \param dev the device ID of which to clear the audio queue
- *
- * \since This function is available since SDL 2.0.4.
- *
- * \sa SDL_GetQueuedAudioSize
- * \sa SDL_QueueAudio
- * \sa SDL_DequeueAudio
- */
-extern DECLSPEC void SDLCALL SDL_ClearQueuedAudio(SDL_AudioDeviceID dev);
-
-
-/**
- *  \name Audio lock functions
- *
- *  The lock manipulated by these functions protects the callback function.
- *  During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that
- *  the callback function is not running.  Do not call these from the callback
- *  function or you will cause deadlock.
- */
-/* @{ */
-
-/**
- * This function is a legacy means of locking the audio device.
- *
- * New programs might want to use SDL_LockAudioDevice() instead. This function
- * is equivalent to calling...
- *
- * ```c
- * SDL_LockAudioDevice(1);
- * ```
- *
- * ...and is only useful if you used the legacy SDL_OpenAudio() function.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_LockAudioDevice
- * \sa SDL_UnlockAudio
- * \sa SDL_UnlockAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_LockAudio(void);
-
-/**
- * Use this function to lock out the audio callback function for a specified
- * device.
- *
- * The lock manipulated by these functions protects the audio callback
- * function specified in SDL_OpenAudioDevice(). During a
- * SDL_LockAudioDevice()/SDL_UnlockAudioDevice() pair, you can be guaranteed
- * that the callback function for that device is not running, even if the
- * device is not paused. While a device is locked, any other unpaused,
- * unlocked devices may still run their callbacks.
- *
- * Calling this function from inside your audio callback is unnecessary. SDL
- * obtains this lock before calling your function, and releases it when the
- * function returns.
- *
- * You should not hold the lock longer than absolutely necessary. If you hold
- * it too long, you'll experience dropouts in your audio playback. Ideally,
- * your application locks the device, sets a few variables and unlocks again.
- * Do not do heavy work while holding the lock for a device.
- *
- * It is safe to lock the audio device multiple times, as long as you unlock
- * it an equivalent number of times. The callback will not run until the
- * device has been unlocked completely in this way. If your application fails
- * to unlock the device appropriately, your callback will never run, you might
- * hear repeating bursts of audio, and SDL_CloseAudioDevice() will probably
- * deadlock.
- *
- * Internally, the audio device lock is a mutex; if you lock from two threads
- * at once, not only will you block the audio callback, you'll block the other
- * thread.
- *
- * \param dev the ID of the device to be locked
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_UnlockAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev);
-
-/**
- * This function is a legacy means of unlocking the audio device.
- *
- * New programs might want to use SDL_UnlockAudioDevice() instead. This
- * function is equivalent to calling...
- *
- * ```c
- * SDL_UnlockAudioDevice(1);
- * ```
- *
- * ...and is only useful if you used the legacy SDL_OpenAudio() function.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_LockAudio
- * \sa SDL_UnlockAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_UnlockAudio(void);
-
-/**
- * Use this function to unlock the audio callback function for a specified
- * device.
- *
- * This function should be paired with a previous SDL_LockAudioDevice() call.
- *
- * \param dev the ID of the device to be unlocked
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_LockAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev);
-/* @} *//* Audio lock functions */
-
-/**
- * This function is a legacy means of closing the audio device.
- *
- * This function is equivalent to calling...
- *
- * ```c
- * SDL_CloseAudioDevice(1);
- * ```
- *
- * ...and is only useful if you used the legacy SDL_OpenAudio() function.
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_OpenAudio
- */
-extern DECLSPEC void SDLCALL SDL_CloseAudio(void);
-
-/**
- * Use this function to shut down audio processing and close the audio device.
- *
- * The application should close open audio devices once they are no longer
- * needed. Calling this function will wait until the device's audio callback
- * is not running, release the audio hardware and then clean up internal
- * state. No further audio will play from this device once this function
- * returns.
- *
- * This function may block briefly while pending audio data is played by the
- * hardware, so that applications don't drop the last buffer of data they
- * supplied.
- *
- * The device ID is invalid as soon as the device is closed, and is eligible
- * for reuse in a new SDL_OpenAudioDevice() call immediately.
- *
- * \param dev an audio device previously opened with SDL_OpenAudioDevice()
- *
- * \since This function is available since SDL 2.0.0.
- *
- * \sa SDL_OpenAudioDevice
- */
-extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev);
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-}
-#endif
-#include "close_code.h"
-
-#endif /* SDL_audio_h_ */
-
-/* vi: set ts=4 sw=4 expandtab: */